The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Breva 750 V7 Small Twins 2004- Nevad Brakes

Sort by Title

Sort by Price

Page 2 of 6

1 2 3 4 5 6

Brake Disc Bolt

BRA98425 Fits V7 Classic, V7 Cafe

Dimensions:
M8 x 25mm

Hex head brake disc bolt, mainly used for rear brake disc but also used for frame applications

Also known as Guzzi ref. 597150, 6 bolts required per disc

part in stock More than 5 in stock

98682425 GU98682425 98 68 24 25
9868 2425 9868.2425 98.68.24.25

£1.20

INC VAT

£1.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Fluid Pipe Black 99cm

BRA00012 Universal Part

Dimensions:
99cm x 5mm x 8mm

99cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. This is long enough for the rear brake master cylinder on V50 II and V35 I

part in stock More than 5 in stock

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 10mm Short Stainless Steel

SSA36794 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats

Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

part in stock 5 in stock

£8.20

INC VAT

£6.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 8mm Stainless Steel

SSA01659 Fits Breva 750, Nevada 750 (1998-2016), V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, V85TT

Dimensions:
M8 x 1.25 standard thread, 10mm threaded shank, 16mm from tip to underside of flats

A4 marine grade stainless steel M8 bleed screw for Brembo P4 front caliper and Tokico calipers used on post 1997 models

Part of Guzzi ref. 31659281, 31659260, 17659260 and 05659230

part in stock 4 in stock

01659230 GU01659230 01 65 92 30
0165 9230 0165.9230 01.65.92.30

£6.10

INC VAT

£5.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Automatic Bleed Valve M10 Bleed Nipple

BRA41650 Fits Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
M10 x 1

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

Completely sealed by O-ring.
Hydraulic system remains sealed even during the venting process.
Reliable non-return function on this auto bleed valve, thus one-man operation.
System has been bled in minutes.
Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover
4 in stock
[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

£26.50

INC VAT

£22.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pads Rear EBC FA266

BRA00266 Fits Breva 750, Nevada 750 (1998-2011), V7 Classic (2008-2011), V7 Cafe (2009-2011), V7 Racer (2009-2011), V7 Stone (2009-2011), V7 Special (2009-2011)

Dimensions:
50mm x 40 mm excluding mounting lug

Pair of EBC FA266 rear brake pads for late type Brembo caliper

Single pin fitting. 2013 onwards V7 models have different two pin pads.

part in stock 3 in stock

31654681-z 31654681 GU31654681 31 65 46 81
3165 4681 3165.4681 31.65.46.81

£19.50

INC VAT

£16.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch

ELA30749 Fits Cali EV (2002-2008), Cali Classic, Cali Vintage, Cali Aquila Nera, Nevada 750 (2004-2016), 1200 Sport, Bellagio, Breva ALL, Griso ALL, Norge ALL, Stelvio, V7 Classic, V7 Racer, V7 Stone, V7 Special, V7 II ALL, V7 III ALL, V9 ALL

Dimensions:
29mm x 24mm x 12mm excluding switch and spade connectors

Brakelight switch

Stop light switch also known as Guzzi ref. AP8224192
See FRA98412 for mounting screw

part in stock 3 in stock

03749845-z 03749845 GU03749845 03 74 98 45
0374 9845 0374.9845 03.74.98.45

£15.50

INC VAT

£12.92 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pads Rear EBC FA256 Organic

BRA81798 Fits Nevada 750 (2012-2016), V7 Stone (2012-2013) V7 Special (2012-2013) V7 Racer (2012-2013), V7 II ALL, V7 III ALL, V9 ALL, V85TT, V7 850 ALL

Pair of organic EBC FA256 rear brake pads

Twin pin fitting. Pre 2012 V7 models use a different brake pad with only one pad pin hole. Also known as Guzzi ref 2R000248

part in stock 3 in stock

AP8133798

£19.30

INC VAT

£16.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Single Banjo Bolt M10 Stainless Steel Kit Fine Thread

BRA01001 Universal Part

Dimensions:
M10 x 1

Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers

Supplied with 4 crush washers. Also known as Guzzi ref. 95990033

part in stock 2 in stock

95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28

Also fits Laverda Jota

£8.40

INC VAT

£7.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Caliper Mounting Bolt

BRA14556 Fits Breva ALL, 1200 Sport (2v/cyl), Norge ALL, V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, Nevada 750 (2004-2013)

Dimensions:
M10 x 28mm

Mounting bolt for brake caliper, bolts caliper to fork leg. Supplied in zinc finish.

part in stock 2 in stock

AP8152385

£5.98

INC VAT

£4.98 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 2 of 6

1 2 3 4 5 6